Lifting Equipment

SAL 235 2 Post Hoist

Features
  • Arm restraints make positioning of arms easy
  • Locks engage when lift is raised and disengage automatically when lift is fully lowered
  • Protected and concealed electric cables and oil pipes
  • Safety protection in full travelling span, overload and cable break protection
Specifications

Capacity

3.5 T

Lifting Height

1950mm

Lifting Time

50 sec

Lowering Time

40 sec

Voltage

380 V

SAL 240 2 Post Hoist

Features
  • Arm restraints make positioning of arms easy
  • Locks engage when lift is raised and disengage automatically when lift is fully lowered
  • Protected and concealed electric cables and oil pipes
  • Safety protection in full travelling span, overload and cable break protection
Specifications

Capacity

3.5 T

Lifting Height

1950mm

Lifting Time

50 sec

Lowering Time

40 sec

Voltage

380 V

SAL 440W 4 Post Hoist

Features
  • Equipped with Two Turntables and Rear Slip plates for 4 wheel
    Alignment
  • Concealed electric cable and oil pipe protection
  • Safety lock in full travelling span and cable break protection
  • 4 cables to ensure the ramp is constantly level
  • Adjustable ramps for different vehicle widths
Specifications

Capacity

4 T

Lifting Height

1800mm

Lifting Time

60 sec

Lowering Time

20-40 sec

Voltage

380 V

SAL 440 4 Post Hoist

Features
  • Concealed electric cable and oil pipe protection
  • Safety lock in full travelling span and cable break protection
  • 4 cables to ensure the ramp is constantly level
  • Adjustable ramps for different vehicle widths
Specifications

Capacity

4 T

Lifting Height

1800mm

Lifting Time

60 sec

Lowering Time

20-40 sec

Voltage

380 V

Pneutek High Rise Lift

Features

The Pneutek High Rise lift is sturdy, strong and practical to use.

Designed to accommodate all vehicles from small passenger to large SUV and 4X4. Improves operator conditions when working on the wheels.

An essential tool for all tyre professionals.

 

The lifting strength (2700 kg)

 

Generated by an air spring that allows high capacity with limited pressure (maximum capacity achievable with only 7 BAR).

 

The heavy duty constructed full deck allows lifting at strategic points from all sides of the lift.

 

Optional lifting arms with three sets of lifting blocks ensure raising the vehicle from manufactures jacking points.

 

The two-stage configuration of the approach ramps allows lifting any vehicle, sports with low spoiler included, without touching the platform.

 

A mechanical safety device prevents the risks of accidental vehicle falling in the event of an air pipeline breakage.

 

A relief valve calibrated at 7 BAR limits the pressure inside the air spring to the prescribed values, relieving any excess to the atmosphere.

 

Lifting pads are adjustable to any point of the lifting arms giving access to exact manufactures jacking points of the vehicle

Specifications

Maximum capacity

2700 kg

Minimum height

115 mm

Maximum height (without arms)

480 mm

Operating pressure

7 bar

Weight (complete with arms)

520 kg

Platform width

2200mm

Platform length

1350mm

Platform length with arms extended

2450mm

Length of lifting arms

650mm

Length of drive on ramps

1080mm

Width of drive on ramps

500mm

SAL Pit Rack

Specifications

Standard Pit rack

4.3m

Also available in

5m & 5,5m

No Cables

No levelling of ramp

No maintenance

Reinforcement base plate for uneven floor

SAE40 Two Post Lift with base plate
4 ton capacity (Electric Release)

Features

Floor plate design, more suitable for low ceiling workshops. Single side electrical lock release. Dual cylinders located in Master and slave column. Dynamic test 115% of the rated capacity. Static test: 150% of the rated capacity. Dual antic skidding safety device from column ladder safety to hydraulic seal protection. Special hydraulic system designed to avoid overload running. ABS control box, 24v low voltage control system. High strength chain drive system. High quality seals from Italy. Quality power rack. CE Certified – Red

Specifications

Lifting Capacity

4 T

Locking Release

Electrical

Min Height

100mm

Lifting Height

1900mm

Lifting Time

50 sec

Power of motor

2.2 kw

Oil Pressure

18 MPa

Power Supply

220 V

Lowering Time

40 sec

SBE40 Two Post Lift , Base free
4 ton capacity (Electric Release)

Features

Clear floor design makes under vehicle service more convenient. Single side electrical lock release. Dual cylinders located in Master and slave column. Dynamic test 115% of the rated capacity. Static test: 150% of the rated capacity .Dual antic skidding safety device from column ladder safety to hydraulic seal protection Special hydraulic system designed to avoid overload running. ABS control box, 24v low voltage control system. High quality seals from Italy. High strength chain drive system

Quality power rack – Red

Specifications

Lifting Capacity

4 T

Locking Release

Electrical

Min Height

110mm

Lifting Height

1900mm

Power of motor

2.2 kw

Oil Pressure

18 MPa

Power Supply

220v / 380v

Lifting Time

50 sec

Lowering Time

40 sec

Reinforcement base plate for uneven floor

SA40 Two Post Lift with base plate
4 ton capacity (Manual Release)

Features

Floor plate design, more suitable for low ceiling workshops. Single side Manual lock release. Dual cylinders located in Master and slave column. Dynamic test 115% of the rated capacity. Static test: 150% of the rated capacity. Dual antic skidding safety device from column ladder safety to hydraulic seal protection. Special hydraulic system designed to avoid overload running. ABS control box, 24v low voltage control system. High strength chain drive system. High quality seals from Italy. Quality power rack. CE Certified – Red

Also Available in Electric Release (SAE40)

Specifications

Lifting Capacity

4 T

Locking Release

Manual

Min Height

100mm

Lifting Height

1900mm

Power of motor

2.2 kw

Oil Pressure

18 MPa

Power Supply

220v

Lifting Time

50 sec

Lowering Time

40 sec

SB40 Two Post Lift , Base free
4 ton capacity (Manual Release)

Features

Clear floor design makes under-vehicle service more convenient. Manual lock release on both sides. Dual cylinders located in Master and slave column. Dynamic test 115% of the rated capacity. Static test: 150% of the rated capacity. Dual anti skidding safety device from column ladder safety to hydraulic seal protection. Special hydraulic system designed to avoid overload running. ABS control box, 24v low voltage control system. High strength chain drive system, High quality seals from Italy. CE Certified – Red

Also available in Electric Release (SBE40)

Specifications

Lifting Capacity

4 T

Locking Release

Manual

Min Height

110mm

Lifting Height

1900mm

Power of motor

2.2 kw

Oil Pressure

18 MPa

Column Height

3722mm

Power Supply

220v / 380v

Lifting Time

50 sec

Lowering Time

40 sec